Duralock Performance Fencing
home page technical specifications installation accredited installers client list photo gallery contact details

Installation

For detailed drawings click on the "Tech Spec" button above.

Click here to download a short video about the safety of Duralock Fencing.
The video is in WMV format and requires Windows Media Player. Also note that the file is 3.6mb in size and may take a while to download, depending on the speed of your Internet connection.

Click on the links below for installation information.
To save the file on your own computer right click on the link and choose "Save As" or "Save Target As".

If you print a page and it does not fit the paper, reduce the margin settings to a minimum under "File - Page Setup".

Gate fastening guide
Field gate installation guide
Gate installation instructions
Field gate installation guide
Gate hanging guide
10ft jump wing instructions
18ft jump wing instructions
24ft jump wing instructions
Post and rail installation instructions
Oval race rail installation instructions
Round race rail installation instructions
8m rolling wing instruction
Lifting barrier installation instructions
6m and 8m slip rail installation instructions
3m and 4m slip rail installation instructions
Installation Guide for circular arenas
Removeable fence system installation instructions
Installation instructions for concrete sunken sockets
Drilling for Rod installation
Slimline post installation instructions
Radiused crowd barrier installation layout

General Instructions

STEP 1

Remove an area of top soil to approximately 1 spade deep
Entfernen Sie etwas Mutterboden auf ca. 1 Spatenbreite
Quitar la capa superficial del suelo en una área del ancho aproximado de una pala
Enlever une section de terre végétale de la largeur d'une bêche environ
Togliere uno strato di terra superiore largo circa quanto una pala

STEP 2

Drive the supplied metal ground spike into the centre of the hole.
Treiben Sie den mitgelieferten Einsatz in die Mitte des Lochs ein.
Clavar la estaca metálica provista en el centro del agujero
Enforcer le pieu métallique fourni au centre du trou.
Conficcare la lancia di ferro in dotazione nel centro del foro.

STEP 3

Loosely assemble the fence over the ground spikes with the rails in the mortice holes.
Setzen Sie den Zaun provisorisch über dem Einsatz mit den Zaunleisten in den Zapfenlöchern zusammen.
Montar la cerca sin apretar sobre las estacas en el suelo colocando las barreras en las mortajas.
Pré-assembler la clôture au-dessus des pieux en engageant les barres horizontales dans la mortaises
Montare la recinzione sopra alle lance inserendo le traverse nei fori a mortasa.

STEP 4

Back-fill the spike chamber with cement. Make the final adjustments and fix caps onto posts.
Füllen Sie die Einsatzkammer mit Zement auf. Nehmen Sie die letzten Ausrichtungen vor und bringen Sie den Pfostenaufsatz an.
Rellenar la cámara de la estace con cemento. Realizar los últimos ajustes y colocar los sombreretes en los postes.
Remplir le logement de ciment. Faire les derniers ajustements et attacher les capuchons sur les poteaux.
Rimpiere di cemento la camera della lancia. Effettuare le regolazioni finali e collocare i cappucci sui pali.

For further details, promotional video or CD please contact:

Duralock (UK) Ltd, The Lectern Hall, West Street, Chipping Norton, Oxfordshire, OX7 5LH
Tel: 01608 644988, Fax: 01608-644979
E-mail: sales@duralock.com